How does an ISO 9001 internal audit work?
An ISO 9001 internal audit runs in four steps: you plan the audit, carry out interviews and sampling, evaluate the findings in the audit report and follow up on the necessary actions. The basis is clause 9.2 of the standard, which requires an audit programme, objective auditors and documented results. If you audit to ISO 9001:2026, you also explicitly define objectives for each audit.
Internal audits are a prerequisite for certification: in the stage 1 audit, the certification body already checks whether internal audits are planned and carried out. Before the stage 2 audit, the QMS should be adequately covered by internal audits, which can be split into several partial audits; it is best to agree scope and timing with your certification body. Used well, however, the internal audit is more than a box-ticking exercise, because it shows you weaknesses before the certification body finds them. Our article How does ISO 9001 certification work? explains the external assessment.
In this article, you will learn what the standard actually requires, how to carry out the audit step by step, which questions to ask and how to grade findings. At the end, you will find a checklist for your next internal audit.
What is an ISO 9001 internal audit?
An internal audit (also called a first-party audit) is a systematic, independent and documented review of your own quality management system (QMS). It answers two questions: does the QMS meet the requirements of ISO 9001 and your own requirements? And is it effectively implemented and maintained in day-to-day work?
It differs from audits carried out by third parties:
What does clause 9.2 of ISO 9001 require?
The requirements for internal audits are set out in clause 9.2, split into 9.2.1 (general) and 9.2.2 (audit programme), as in the 2015 edition. The current edition is ISO 9001:2026, published on 16 September 2026. Companies already certified to ISO 9001:2015 must complete the transition by 30 September 2029 at the latest. Internal audits are not a legal obligation but a requirement of the standard: if you want to be certified to ISO 9001, you must meet it. Our article ISO 9001 requirements for companies gives an overview of all clauses.
Audit programme and frequency
You carry out internal audits at planned intervals and set up an audit programme for them: frequency, methods, responsibilities, planning and reporting. In doing so, you take into account how important the processes are, what has changed in the organisation and what previous audits have shown.
The standard does not prescribe a fixed frequency. You set it on a risk basis: you audit important, critical or error-prone processes more often and stable processes less often. Many companies plan in an annual cycle and spread the audits across several partial audits. What matters is a justified frequency and adequate coverage of the QMS.
Objectives, criteria and scope for each audit
For each audit, you define criteria (what is it measured against?) and scope (which processes, sites and periods?). New in ISO 9001:2026 is that you also explicitly define audit objectives, i.e. what the audit is meant to clarify. For example: “Check whether customer complaints from the third quarter were fully recorded, analysed and closed with actions.” If you are still certified to the 2015 edition, this becomes relevant with the transition at the latest. You can read what else changes in the new edition in ISO 9001:2026: What changes with the new version?
Objectivity and impartiality
The standard requires you to select auditors so that objectivity and impartiality are ensured. It does not explicitly prohibit auditing your own area. In practice, however, anyone who is responsible for a process or works in it should not audit it. Small companies solve this with cross-audits between departments or with external auditors.
Auditor competence
An external auditor certificate is not required. Auditors do need demonstrable knowledge of ISO 9001 and audit methodology, for example based on the ISO 19011 guidelines. Competence is based on education, training and experience (clause 7.2). Suitable evidence includes training and qualification records, documented audit practice such as accompanied audits, and a regular evaluation of audit performance. Knowledge of the relevant industry and processes helps to interpret evidence correctly.
Reporting, actions and documentation
You report the results to relevant management. You take the necessary corrections and corrective actions without undue delay. As documented information, you retain evidence of the implementation of the audit programme and the audit results. Our article Which documents are required for ISO 9001? shows which other evidence the standard requires.
How do you carry out an internal audit step by step?
An internal audit doesn’t have to be complicated. If you plan the four steps properly, you will see clearly at the end what works, where nonconformities exist and where you can improve processes.
1. Planning and preparation
Derive the audit plan for the individual audit from the audit programme: objectives, criteria, scope, date, auditor and interviewees. Inform the process owners in good time. Review the relevant process descriptions, KPIs and results of previous audits beforehand and prepare a process-specific question list.
2. Conducting the audit
Start with a short opening meeting on the schedule and objectives. Then carry out interviews, look at the work on site and check samples such as approvals, tickets, training records or complaints. Back up every finding with concrete evidence. In the closing meeting, present the preliminary results.
3. Evaluation and audit report
Grade the findings (conformity, opportunity for improvement, nonconformity) and record them in the audit report. A good report contains:
- objectives, criteria and scope of the audit
- date, auditor and interviewees
- findings with evidence and reference to the standard
- the grading of each nonconformity
- overall assessment and recommendations
4. Actions and follow-up
For each nonconformity, the process owners evaluate which response is needed (clause 10.2): a correction that eliminates the specific problem and, after a root cause analysis, where necessary a corrective action that prevents recurrence. Not every case requires both. If you decide against a further corrective action, you justify this in a traceable way.
You implement and document the necessary actions and check their effectiveness. You set the timing based on the significance, risk and type of action: through evidence, a targeted follow-up check or a further audit. For serious nonconformities, you don’t wait for the next regular audit. The results feed into the management review (clause 9.3) and drive continual improvement.
Which questions should you ask in an ISO 9001 internal audit?
How well processes work in practice becomes clear in conversations with employees. Open questions and concrete requests such as “Show me the last case …” reveal more than yes/no questions. The following table shows sample questions for clauses 4 to 10. It is not a complete audit checklist: add questions to suit the process, audit objectives and audit criteria.
Tip: Ask the people who actually carry out the process, not only the process owners. That way you see whether requirements are applied in daily work.
How do you grade audit findings?
An audit report shows not only what was checked, but also how well it went. In practice, findings are divided into three categories:
- Conformity: the process meets the requirements of the standard and your internal requirements.
- Opportunity for improvement: the process works but could be more efficient or robust. No action is mandatory.
- Nonconformity: a requirement is not met. You evaluate the necessary response, the causes and the need for corrective action.
Nonconformities are usually graded further. ISO 9001 itself does not define these grades; they are defined in ISO/IEC 17021-1, the standard for certification bodies. Many companies adopt them for internal audits. What matters is the impact on the ability of the QMS to achieve its intended results:
- Minor nonconformity: the nonconformity does not affect this ability. A possible example is a single missing record in an otherwise functioning process.
- Major nonconformity: the nonconformity affects this ability, or there is significant doubt about the effectiveness of a process. This can be a requirement that is not implemented at all or systematically not met, but also a single serious failure.
Checklist: are you ready for the internal audit?
- Audit programme: the programme sets a justified, risk-based audit frequency and covers the QMS adequately.
- Audit objectives: objectives, criteria and scope are defined in writing for the audit.
- Auditor: competence is demonstrated, for example through training and audit practice, and the person is not auditing their own area.
- Audit plan: date, schedule and interviewees are agreed and communicated.
- Documents: process descriptions, KPIs and the report of the last audit have been reviewed.
- Question list: the questions fit the process, the audit objectives and the criteria.
- Open actions: actions from previous audits have been checked for implementation and effectiveness.
- Evidence: samples are documented and every finding is backed up.
- Audit report: findings are graded and the report has been sent to relevant management.
- Follow-up: for every nonconformity, the response, causes and need for action have been evaluated, owners and deadlines set and a suitable time for the effectiveness check defined. The results feed into the management review.
Tip: If you also work to ISO 27001, you can combine the internal audits for both standards. Both follow the Harmonized Structure, so the audit programme, reports and management review can be shared.
Conclusion
The internal audit is a prerequisite for every ISO 9001 certification and your most important tool for keeping the QMS effective. With a risk-based audit programme, clear objectives for each audit, competent and objective auditors and consistent follow-up, you meet clause 9.2 – including under the new ISO 9001:2026 edition.
Plan internal audits as a fixed part of the year rather than a sprint before certification. The more open the questions and the more concrete the evidence, the more you learn about your processes – and the more relaxed the external audit will be.
Want to prepare for your audit in a structured way? With ISO 9001 audit preparation from heyData, you manage all ISO 9001-relevant policies and documented information digitally and with version control. You get support with nonconformities and corrective actions, with the management review and with finding the right internal and external auditors.
Take the first step: Book a free demo now
FAQ
Is an internal audit mandatory under ISO 9001?
Is an internal audit mandatory under ISO 9001?
Yes, if you want to be certified. Clause 9.2 of ISO 9001 requires internal audits at planned intervals. In the stage 1 audit, the certification body already checks whether internal audits are planned and carried out; before the stage 2 audit, the QMS should be adequately covered by internal audits, which can be split into several partial audits. It is not a legal obligation.
How often does an ISO 9001 internal audit have to take place?
How often does an ISO 9001 internal audit have to take place?
The standard does not set a fixed frequency, only “planned intervals”. You define them in the audit programme on a risk basis, depending on the importance of the processes, changes in the organisation and the results of previous audits. In practice, many companies plan in an annual cycle and spread the audits across several partial audits.
Who can carry out an ISO 9001 internal audit?
Who can carry out an ISO 9001 internal audit?
Anyone with the necessary competence who can audit objectively and impartially. An external auditor certificate is not required, but you must be able to demonstrate competence, for example through training, experience and documented audit practice. Auditors should not audit their own work; small companies solve this with cross-audits between departments or with external auditors.
What changes for internal audits with ISO 9001:2026?
What changes for internal audits with ISO 9001:2026?
Above all, you now explicitly define objectives for each audit, in addition to criteria and scope (clause 9.2.2). The rest stays the same: audit programme, objective auditors, reporting and actions. Companies already certified to ISO 9001:2015 must complete the transition by 30 September 2029 at the latest.
What is the difference between a major and a minor nonconformity in an audit?
What is the difference between a major and a minor nonconformity in an audit?
What matters is the impact on the QMS. A major nonconformity affects the ability of the QMS to achieve its intended results – even a single serious failure can be a major nonconformity. A minor nonconformity does not. The terms come from ISO/IEC 17021-1, the standard for certification bodies, not from ISO 9001 itself.








